The 5/8″ lower link end is a critical interface piece in the tractor’s 3‑point hitch system. It attaches at the end of the lower lift arm and provides a bore (hole) or ball mount sized for 5/8 inch (≈ 15.875 mm) pins or mounting hardware. This lower link end must be robust and precisely manufactured to handle loads, torque, and stresses from the implement during field operations.
Key Features & Considerations
-
Bore / Pin Size: The internal diameter is 5/8″ (15.875 mm), so the implement’s lug or pin must match that size exactly to avoid play or wear.
-
Material & Strength: Typically made of high-strength steel or forged material to resist bending, fatigue, and cyclic loads.
-
Fit & Geometry: The tail (slip‑in portion, if any), thickness, width, and alignment must be matched to the lower arm geometry to ensure proper leverage and no binding.
-
Mounting Interface: The end might be a plain bore, or it may include mounting holes or a ball/swash plate depending on design.
-
Wear Areas: The bore becomes the most vulnerable area over time (ovalization, elongation). Also, edges and mounting surfaces can wear or crack.
-
Compatibility: Ensure that the 5/8″ lower link end matches the tractor’s category (light duty linkage), applicable for smaller tractors or implements.
-
Maintenance: Inspect periodically for wear, ensure good lubrication, and replace the end if wear exceeds tolerance to prevent damage to the lower arm.
Reviews
There are no reviews yet.