HALF PTO ASSY. SHEARING BOLT TYPE WITHOUT COVER 38MM CROSS OUTER LOCK ROTAVATOR END SHAKTIMAN ROTAVATOR

This half PTO (power take‑off) assembly is designed specifically for the rotavator end of Shaktiman machines which use a 38 mm cross section shaft with an outer‑lock coupling system. The “shearing bolt type” means a bolt is incorporated to act as a fail‑safe: if the PTO encounters an overload or obstruction, the shearing bolt will fail first, protecting more expensive components downstream. The “without cover” version means the assembly does not include the protective cover/guard, so the user should ensure safety measures or a separate guard are in place.

Key features & fitment details:

• Cross section: 38 mm (commonly listed as 38 mm – 1210 cross) for Shaktiman.

• Coupling type: Outer‑lock (i.e., external lock style) — must match your implement’s coupling system.

• Location: Rotavator end (i.e., implement side, not the tractor end) — ensures correct fitment for the PTO shaft that connects to the rotavator.

• Shearing bolt type: Provides overload protection by sacrificing the bolt rather than damaging gearbox/shaft or yoke assemblies.

• Without cover: No protective cover included in this version, so extra precaution or separate guard may be needed.

Installation & usage guidance:

• Before purchasing/installation: Confirm your PTO/shaft system uses 38 mm cross and outer‑lock, and that it’s the rotavator end needing replacement.

• Inspect the old PTO half: check for play, wear on splines, any damage to the coupling or yoke.

• During install: Align properly, torque bolts/shearing bolt to spec, ensure the assembly fits snugly and nothing is loose.

• After installation: Because no cover is included, ensure safety covers or guards are fitted and functioning. Run a low‑load test and verify there’s no excessive vibration or misalignment.

• Keep spare shearing bolts on hand — since this assembly is the shearing‑bolt type, if the bolt fails it will need replacement to restore functionality.