L/LINK ENDS SWARAJ SMALL

The small lower link end for Swaraj tractors is the terminal interface between the tractor’s lower lift arm (lower link) and the implement mounting pin or ball. In smaller or lighter duty versions, this end features a reduced bore diameter, slimmer body, and lighter structural sections, while still maintaining strength to handle normal linkage loads.

Key characteristics:

• Bore / Pin Size: Smaller internal diameter (for example in Cat‑1 or small‑bore configurations) to match lighter implements.

• Material & Construction: Made from quality steel, often heat treated or reinforced at critical sections to resist fatigue and wear.

• Fit / Tail Dimensions: The tail or slip‑in portion (if applicable) must match the internal width and thickness of the lower link arm.

• Load Capability: Designed for moderate loads; not intended for extremely heavy or high stress implements.

• Wear & Maintenance: Common wear points include the bore (ovalization), the mounting bolt holes, and the edges. Regular inspection and replacement are important.

• Match to Tractor Linkage: Must align with the tractor’s geometry, alignment, and load paths. Using a “small” link end when the tractor requires a “big” one can lead to failure.